Wireless modules WR-1 / WM-1
Pair a new module(s):
- settings page → WM/WR pairing,
- turn ON target module(s),
- within 10 seconds press Pair module(s).
Search for new devices after module(s) pairing:
- settings page → Scan w-less dev.
- and/or when WR module is recognized by EVSE, it will be positioned on io mux page based on set address by jumper: WR-1 address 200 is assigned to WR 1 position, 201 → WR 2, etc…
wiki/20_rdc_charger/35_commissioning/03_wr_wm.txt · Last modified: 2023/08/02 13:47 by saso.santelj