wiki:20_rdc_charger:50_troubleshooting:start
This version is outdated by a newer approved version.
This version (2023/05/04 09:01) is a draft.
Approvals: 0/1
This version (2023/05/04 09:01) is a draft.Approvals: 0/1
This is an old revision of the document!
Troubleshooting
| ERROR | POSSIBLE CAUSES | SOLUTION |
| CP positive/negative voltage | The voltage on the CP connector is out of permitted range | Check the charging cable and connector and reconnect the electric vehicle |
| RCD sensor trip | Switch has detected a DC differential current | If is problem with only one vehicle, please call an authorized vehicle service |
| RCD sensor malfunction | RCD is damaged or not connected | Please call service of the charger |
| Undervoltage/Overvoltage | The voltage at the input of the charger is out of permitted range | Please call service of the charger |
| Charge with ventilation | The vehicle requires charging with ventilation and “Charging with ventilation” is not enabled on the user interface | WEnable “Charging with ventilation” on the user interface if the electric vehicle is charged in a ventilated area or outdoor |
| Communication | LAN | RJ45 |
| WiFi | 802.11b/g/n | |
| Power | Adapter | 5V 3 A |
| Battery | Optional |
wiki/20_rdc_charger/50_troubleshooting/start.1683190883.txt.gz · Last modified: 2023/05/26 13:04 (external edit)