This section describes standard GRMS room variants used as reference configurations for HIQ Hospitality projects.

Each variant defines a typical guest room automation setup, including the main controller, access control, room panel, HVAC control, lighting, blinds, sensors, communication modules and connection to the central S-RMS system through Linker.

The purpose of these pages is to provide a clear technical overview of available standard room configurations. Detailed wiring, I/O allocation, programming and project-specific adaptations are defined in the corresponding electrical schemes and technical documentation.

Standard GRMS room variants can include the following functional groups:

• room access control
• door lock and door status
• in-room touch panel with TGP-S adapter
• ES-W2 room temperature sensor
• HVAC / fan-coil control
• lighting control
• blinds control
• window contact monitoring
• presence detection
• SOS / alarm input
• master off / room exit scene
• floor heating
• ventilation
• managed power supply for energy-saving logic
• Ethernet / Linker connection to S-RMS

• These variants represent standard reference configurations.
• Final I/O allocation may be adjusted according to room type and project requirements.
• Electrical schemes and controller programs should be prepared based on the selected variant.
• Additional variants can be added if required by future project configurations.