User Tools

Site Tools


wiki:02_hiq-hotel:01_grms:standard_room_variants:start

This is an old revision of the document!


Standard room variants

General description

This section describes the standard GRMS room variants used as reference configurations for HIQ Hospitality projects.

Each variant defines a typical room automation setup, including the main controller, access control, room panel, HVAC control, lighting, blinds, sensors, communication modules and connection to the central HIQ/S-RMS system.

Detailed wiring, I/O allocation and project-specific adaptations are defined in the corresponding electrical scheme and technical documentation.

Room variant overview

Variant Page Main controller Short description
V1 V1 - MC-24 Full Room MC-24-H1 Base full GRMS room with access, room panel, FC-1-IQ, lighting, blinds, sensors and energy-saving logic.
V1.1 V1.1 - MC-24 Full Room + LC-10 MC-24-H1 Extended full room with LC-10 module for additional lighting circuits and blinds.
V1.2 V1.2 - MC-24 Full Room + RS485 MC-24-H1 Full room with additional RS485 / Modbus communication through CAD-232.
V1.3 V1.3 - MC-24 Full Room + LC-10 + RS485 MC-24-H1 Extended full room with both LC-10 expansion and RS485 communication.
V2 V2 - MC-24 Direct HVAC MC-24-H1 Simplified MC-24 variant where outputs are used directly for HVAC control.
V3 V3 - MC-230 RS485 HVAC MC-230-01 Compact room variant with integrated RS485 and direct IEX connection.
V3.1 V3.1 - MC-230 RS485 + EnOcean MC-230-01 MC-230 variant with RS485 and EnOcean wireless sensor option.

Notes

  • These variants represent standard reference configurations.
  • Final I/O allocation may be adjusted according to project requirements.
  • Electrical schemes and controller programs should be prepared based on the selected variant.
  • Additional variants can be added if required by future project configurations.
wiki/02_hiq-hotel/01_grms/standard_room_variants/start.1778589179.txt.gz · Last modified: by paulo.krbavcic