User Tools

Site Tools


wiki:02_hiq-hotel:01_grms:02_tgp_panels:start

TGP touch panel

Corridor

The panel in the corridor displays the hotel logo, room number and, in the bottom line, the status of the access code reader, the DND or MUR icon and the door-bell button.


1 Hotel Logo
2 Room number
3 Access code reader status
4 DND / MUR status
5 Door-bell button
Access code reader type DND / MUR status Door-bell button

QR code & RFID card reader

No DND or MUR

Door-bell enabled

RFID card reader

DND active

Door-bell disabled

Keypad (touch to show keypad)

MUR active

In room

Idle screen

Day time Night / Low-light

Main screen


1 Previous screen
2 Idle screen
3 Next screen
4 Toggle DND (Do Not Disturb)
5 Toggle MUR (Make Up Room)
6 Unlock door
7 Scene “All off”
8 Scene “Soft”
9 Scene “Full”

HVAC screen


1 HVAC Set-point temperature increment / decrement
2 HVAC Fan limit increment / decrement
3 Toggle Bath ventilation

Lights screen


1 Toggle light ON / OFF

Dimmers & Blinds screen


1 Slide to set lightness
2 Toggle light ON / OFF
3 Slide to set blinds setpoint (left = closed)
4 Stop blinds

Wake-up screens

Setup


1 Toggle wake-up alarm ON / OFF
2 Set wake-up time
3 Set wake-up
4 Toggle wake-up scene

Alarm


1 Snooze wake-up alarm
2 Turn off wake-up alarm

Door-bell screen

Door-bell screen is activated when door-bell button on corridor panel is pressed.

When the door-bell is activated, the beeper beeps briefly.


1 Close door-bell screen
2 Unlock door

SOS screen

SOS screen is activated when an SOS pull-switch is activated.

During SOS panel periodically beeps.


1 Dismiss off SOS alarm

Fire-alert screen

Fire alert screen is activated when temperature rise is abnormal. It can be activated also externally (from fire control center, reception, …).

During Fire alert panel periodically beeps.


Fire alert cannot be dismissed from in-room panel.

wiki/02_hiq-hotel/01_grms/02_tgp_panels/start.txt · Last modified: 2024/09/05 06:09 by goran.kocjancic