The diagram shows the wiring of the Smart Presence setup, including a PIR sensor and a door contact connected to the system inputs.

Two input modules (IX) are used:

• PIR IX – connected to the PIR00 presence sensor
• DOOR IX – connected to the door contact

Power supply is provided via:

• X+ / X- – 24V DC supply distributed to the devices

Connections:

• PIR00 sensor – connected with three wires (+, C, NO) for power and signal output
• Door contact – connected via dry contact (C, NO) for door status detection

Cable types are indicated:

• 3×0.5 – for PIR sensor connection
• 2×0.5 – for door contact connection

This diagram defines a basic presence detection setup, combining motion detection and door status to enable occupancy-based control logic.