hiq:components:bio-24r
Table of Contents
Bio-24R
12 dig inputs, 12 relay 5A outputs
| Model number: | Bio-24R |
|---|---|
| Mounting: | DIN rail, 6M, 106 mm |
Features
- IEX-2 module
Technical specification
| Input type | 24V 7mA, opto isolated, bidirectional |
| Operating conditions | 0..50°C, 0..85% rh non-condensing |
| Degree of protection | IP20 |
| Installation category | II |
| Level of ambient pollution | 2 |
| Standards | EN 61010-1, EN 61010-2-201, EN 61131-2 |
| Debounce filter | 0, 5 or 100ms, software selectable |
| Output type | relay 5A/250VAC or 3A/30VDC resistive |
| Contact type | normally open |
| Continuous load | 3A each relay |
| 36A all relays | |
| Power supply | 24V (18..28V), 260mA |
| (20mA+11mA*active outputs+9mA*active inputs) | |
| Galvanic isolation | 4kV between inputs and internal circuit |
| 4kV relay contact | |
| Weight | 320g |
Terminals
Dimensions
hiq/components/bio-24r.txt · Last modified: by alen.mejak