wiki:20_rdc_charger:30_software:start
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
wiki:20_rdc_charger:30_software:start [2023/05/26 13:04] – external edit 127.0.0.1 | wiki:20_rdc_charger:30_software:start [2024/03/11 09:01] (current) – [Table] saso.santelj | ||
---|---|---|---|
Line 48: | Line 48: | ||
| Name of EVSE - default is RDC Charger. | | Name of EVSE - default is RDC Charger. | ||
^ 2. DLM sign || | ^ 2. DLM sign || | ||
- | | {{wiki:rdx_charger: | + | | {{wiki:20_rdc_charger: |
^ 3. Data from ongoing charging session | ^ 3. Data from ongoing charging session | ||
| **EV charging icon with LED light** | | **EV charging icon with LED light** | ||
- | | **State** | + | | **State** |
| **Phases** - number of used phases while charging | | **Phases** - number of used phases while charging | ||
| **Power** | | **Power** | ||
- | | **EVSE max** | + | | **EVSE max** |
| **Max current** | | **Max current** | ||
| **Last session** | | **Last session** | ||
^ 4. Error message(s) | ^ 4. Error message(s) | ||
- | | Possible errors are: CP positive voltage; CP negative voltage; RCD sensor trip; Overvoltage; | + | | Possible errors are: CP positive voltage; CP negative voltage; RCD sensor trip; Overvoltage; |
^ 5. EVSE settings | ^ 5. EVSE settings | ||
- | | **Priority charging** | + | | **Priority charging** |
- | | **Locked** | Disable unauthorized use of EVSE, authorization is possible with RFID tags or by cloud application. | + | | **Authorization required** | Disable unauthorized use of EVSE, authorization is possible with RFID Card, QR code or by cloud application. |
| **Allow charging with ventilation** | | **Allow charging with ventilation** | ||
| **Disable button** | | **Disable button** | ||
Line 96: | Line 96: | ||
|<100% 25% 35%>| | |<100% 25% 35%>| | ||
- | ^ Error ^Possible causes ^ Possible solution ^ | + | ^ Error ^ Possible causes |
- | |CP positive voltage\\ CP negative voltage |Measured voltage on CP pin is out of range. | Check your charging cable and plug. Reconnect your EV. If error still appears, please contact your EVSE service. | + | | CP positive voltage\\ CP negative voltage |
- | |RCD sensor trip | DC current leak detected. | Please try to connect another EV, if error still appears, please contact your EVSE service. Otherwise, please contact an authorized car service department. | | + | | RCD sensor trip | DC current leak detected. |
- | |RCD sensor malfunction | + | | RCD sensor malfunction |
- | |Undervoltage\\ Overvoltage | + | | Undervoltage\\ Overvoltage |
- | |Charge with ventilation | + | | Charge with ventilation |
- | |PS reading error | + | | PS reading error (EVSE) |
- | |Current is higher than allowed | + | | PS reading error (grid) |
- | |Internal temperature is too high | Temperature inside of charger is too high. |Make sure charger is not exposed to direct sunlight. Please contact your EVSE installer. | | + | | Current is higher than allowed |
+ | | Internal temperature is too high | ||
+ | | Can not lock | Only for charger with socket: Socket can not lock the connected plug. | Unplug the cable and check if the plug is clean. If it's clean, try charging with a different cable. If it still doesn' | ||
+ | | Can not unlock | ||
+ | | Socket temperature is too high | Only for charger with socket: The socket is overheating, | ||
+ | | Unavailable | ||
+ | | Other error | Other errors that can not be resolved by the user. | Contact EVSE service. | ||
</ | </ | ||
wiki/20_rdc_charger/30_software/start.1685106296.txt.gz · Last modified: 2023/05/26 13:04 by 127.0.0.1