The open source alternative to TeamViewer

Official instructions

Download Rustdesk client for your platform from Rustdesk Github and run it.

Select “Install” button and follow installation procedure.

Select any of 2 setup icons (tre dots on left of ID or pencil near one-time password) to enter settings.

Select “Network” page (left side menu) and click “Unlock network settings” on top of the page.

Copy below text (into clipboard) and paste it by click on clipboard icon.

9JSP3NESXJXMit0QO9keltyVx4WSVtyQGFkc3VnSJplSRRDTPJzKEpGRLJzN2JiOikXZrJCLi02bj5iYhxWLxlGaus2clRGdzVncv8iOzBHd0hmI6ISawFmIsIiI6ISehxWZyJCLi02bj5iYhxWLxlGaus2clRGdzVnciojI0N3boJye

Click “Apply” button and exit “Settings” by clicking x near Settings tab (will appear only when mouse is over).

Check status at bottom of screen (should be Green dot with Ready status).

Enable access to wour computer by sharing ID and one-time password.

Permanent password is needed for unattended access to your computer (assess to home computer from work).

Go-to Settings - Security

1. Unlock security settings

2. Set permanent password

3. Enter password

Make sure that “Use both passwords” option is checked.

Now you can access your computer from another client connected to the same Rustdesk server.