hiq:components:lc-dc2
This version is outdated by a newer approved version.
This version (2025/02/17 10:22) is a draft.
Approvals: 0/1
This version (2025/02/17 10:22) is a draft.Approvals: 0/1
This is an old revision of the document!
Table of Contents
LC-DC2
Voltage inputs, 12 x 0…10V
| Model number: | LC-DC2 |
|---|---|
| Mounting: | DIN rail |
Features
- IEX-2 module
- DALI-2 application controller
- DALI-2 multi-master
- send and receive DALI power supply
- 10 digital inputs
Technical specification
| Input type | 0..10V |
| Input resistance | 10K |
| A/D converter | V/f conversion with auto calibration |
| Resolution | 13 bits in 0.1% mode |
| 11 bits in 0.5% and 1% mode | |
| Temperature drift | +-0.01%/°C of measuring range |
| Scan time | 30ms..980ms, depends on input mode |
| Integration time | 60ms/20ms, depends on input mode |
| Calibration reference | 10.000V |
| Power supply | 24V (18..28V), 50mA |
| Galvanic isolation | 1kV between digital and analog circuit |
| no isolation between chanels | |
| Operating conditions | 0..50°C, 0..85% rh non-condensing |
| Weight | 160g |
| Degree of protection | IP20 |
| Level of ambient pollution | 2 |
| Standards | EN 61010-1, EN 61010-2-201, EN 61131-2 |
Terminals
Dimensions
hiq/components/lc-dc2.1739787753.txt.gz · Last modified: 2025/02/17 10:22 by alen.mejak