hiq:components:cr-w2-iq
This version is outdated by a newer approved version.
This version (2023/12/18 13:41) is a draft.
Approvals: 0/1

Approvals: 0/1
This is an old revision of the document!
Table of Contents
CR-W2-IQ
Wiegand card reader interface for Access Control systems
Model number: | CR-W2-IQ |
---|---|
Mounting: | DIN rail, 3M |
Connection: | IEX-2 bus |
- card reader for 2 Wiegand RFID receivers
- 2 × relay output
- 4 × switch/potentiometer input
Technical specifications
Power supply: | 24 VDC (18..26 VDC), 120 mA |
Digital inputs: | internal pull-up 12V, 2mA |
Analog inputs: | 0-10 V or potentiometer 10 kohm |
Relay outputs: | 5 A / 250 V |
Size and weight: | 53 x 117 x 58 mm, 160g |
Mounting: | DIN rail |
Protection: | IP20 |
Communication: | Wiegand protocol |
Operating conditions: | 0..45 °C, 0..95 % RH non-condensing |
Storage temperature: | -20..75 °C |
Standards: | EN 61000-6-2, EN 61000-6-3 |
Terminals
Dimensions
hiq/components/cr-w2-iq.1702906866.txt.gz · Last modified: 2023/12/18 13:41 by alen.mejak