hiq:components:bio-20r
This version is outdated by a newer approved version.
This version (2026/03/03 08:25) is a draft.
Approvals: 0/1The Previously approved version (2023/12/18 13:29) is available.
This version (2026/03/03 08:25) is a draft.Approvals: 0/1The Previously approved version (2023/12/18 13:29) is available.
This is an old revision of the document!
Table of Contents
Bio-20R
10 dig inputs, 10 relay 8A outputs
| Model number: | Bio-20R-MK2 |
|---|---|
| Mounting: | DIN rail, 6M, 106 mm |
| Old code: | Bio-20R |
Features
- IEX-2 module
Technical specification
| Input type | dry contact, internal pull-up 12V 2mA |
| Output type | relay 8A/250VAC or 8A/30VDC resistive |
| Contact type | normally open |
| Continuous load | 6A each relay |
| 20A all relays (mk1) | |
| 12A each relay group (mk2) | |
| Power supply | 24V (18..28V), 120mA |
| (30mA+9mA*number of active outputs) | |
| Galvanic isolation | 4kV between internal circuit and relay contact |
| Operating conditions | 0..50°C, 0..85% rh non-condensing |
| 36A all relays | |
| Power supply | 24V (18..28V), 260mA |
| (20mA+11mA*active outputs+9mA*active inputs) | |
| Weight | 300g |
| Degree of protection | IP20 |
| Level of ambient pollution | 2 |
| Standards | EN 60730-1 |
Terminals
Dimensions
hiq/components/bio-20r.1772526347.txt.gz · Last modified: by paulo.krbavcic