Table of Contents
Bio-24PWM
12 dig inputs, transistor outputs, 4 fast counter inputs, 6 PWM outputs
| Model number: | Bio-24PWM |
|---|---|
| Mounting: | DIN rail, 6M, 106 mm |
Features
- IEX-2 module
Technical specification
| Input type | 24V 7mA, opto isolated, bidirectional |
| Operating conditions | 0..50°C, 0..85% rh non-condensing |
| Degree of protection | IP20 |
| Installation category | II |
| Level of ambient pollution | 2 |
| Standards | EN 61010-1, EN 61010-2-201, EN 61131-2 |
| Pulse counter | IX0..IX3 (4 independent counters) |
| Input frequency | max. 1kHz, 50% duty cycle |
| Output type | PNP transistor 30V 1A |
| Protection | overload, short circuit and reverse supply |
| PWM outputs | QX0..QX5 (6 independent outputs) |
| PWM frequency | 250Hz or 500Hz, software selectable |
| PWM range | 0..100% in 40 steps (250Hz), 0..100% in 20 steps (500Hz) |
| Power supply | 24V (18..28V), 80mA |
| Galvanic isolation | 4kV between inputs and internal circuit |
| 4kV between internal circuit and output transistors | |
| Weight | 270g |
Terminals
Dimensions
