====== RB-100-AQ ======
**Temperature, humidity and CO2 on wall sensor RS485**
<WRAP column 600px>

{{:hiq_components:rb-100-aq_main_picture.png}} 



</WRAP>

<WRAP column 350px>

|< 100% 35% 65% >|
| Model number: ^ RB-100-AQ                                        |                                       
| Mounting:     | In-wall, dose                             |
| Dimensions:   | 100 x 122 x 44 mm                               |
| Connection:   | RS485 to HIQ MC controller or Cybro|
| Frame color: | Black     |

</WRAP>


===== Features =====
  * High measurement accuracy
  * Built-in high-performance microprocessor
  * Multiple probes available
  * Integrated use of temperature, humidity and CO2
  * Superior performance and long-term stability  

===== Technical specifications =====


| Power supply:            | 10-30VDC  Note: 0-10VDC output (limited to 24VDC Power Supply)      |
| Signal output:                 | 4-20mA/0-5VDC/0-10VDC RS485 output (Modbus protocol)  |
| Digital output:                 | Device address 1-255, default 1  |
|                 | Device baud rate 2400, 4800, 9600 optional, default 4800                        |
|                  | Byte format 8-bit data bit, 1 stop bit, no parity                                    |
| Measuring temperature             | -20°C to +80°C                                        |
| Measuring humidity :             | Relative humidity 0%-100% RH|
| Temperature accuracy  :             | 0.5°C (25°C)|
| Humidity accuracy  :             | 3% RH (20%RH-80%RH, 25°C) |
| Recommended work temperature  :             | 5°C - 55°C |
| Storage temperature  :             | 5°C - 30°C, 80%RH |

===== Wiring ===== 


{{hiq_components:rb-100-aq_wiring.png }}

<WRAP pagebreak></WRAP>

===== Dimensions ===== 


{{hiq_components:rb-100-aq_dimensions.png }}

<WRAP pagebreak></WRAP>