Differences

This shows you the differences between two versions of the page.

--- wiki:02_hiq-hotel:01_grms:02_tgp_panels:inroom [2026/04/01 11:56] – paulo.krbavcic
+++ wiki:02_hiq-hotel:01_grms:02_tgp_panels:inroom [2026/04/01 12:06] (current) – [Fire-alert screen] paulo.krbavcic
@@ Line 24: / Line 24: @@
 ===== Main screen =====
-<WRAP group>
+The main screen provides direct control of room comfort settings:
-<WRAP 600 px column>
+  * **Temperature setpoint** – adjustment of desired room temperature
+  * **Fan speed / limit** – control of HVAC fan operation
+  * **Room status** – DND (Do Not Disturb) and MUR (Make Up Room)
+The interface is designed for intuitive use with clear visual feedback.
 {{:wiki:02_hiq-hotel:01_grms:02_tgp_panels:in-room_simple_screen_2nd_page.png?500|}}
-<WRAP column>
+----
-</WRAP>
-</WRAP>
 =====  Door-bell screen =====
-Door-bell screen is activated when door-bell button on corridor panel is pressed.
+The door-bell screen is activated when the door-bell button on the corridor panel is pressed.
-When the door-bell is activated, the beeper beeps briefly.
+  * **Visual notification** – door-bell icon and room indication
+  * **Acoustic signal** – short beep when activated
+  * **Actions available:**
+    * **Cancel** – closes the screen
+    * **Unlock** – optionally unlocks the door
-<WRAP group>
+This function enables direct interaction between guests and visitors or staff.
-<WRAP 600 px column>
 {{:wiki:02_hiq-hotel:01_grms:02_tgp_panels:in-room_door-bell.png?500|}}
-</WRAP>
+----
-\\
-|<350px 50px >|
-^  1  | Close door-bell screen    |
-^  2  | Unlock door               |
-<WRAP column>
-</WRAP>
-</WRAP>
 ===== SOS screen =====
-SOS screen is activated when an SOS pull-switch is activated.
+The SOS screen is activated when an emergency (SOS) signal is triggered.
-During SOS panel periodically beeps.
+  * **Clear visual alert** – red warning indication
+  * **Acoustic alert** – periodic beeping
+  * **Action available:**
+    * **Cancel** – dismisses the SOS alarm
-<WRAP group>
+This feature is used for emergency situations and alerts staff immediately.
-<WRAP 600 px column>
 {{:wiki:02_hiq-hotel:01_grms:02_tgp_panels:in-room_sos.png?500|}}
-</WRAP>
+----
-\\
-|<350px 50px >|
-^  1  | Dismiss off SOS alarm      |
-<WRAP column>
-</WRAP>
-</WRAP>
 =====  Fire-alert screen =====
-Fire alert screen is activated when temperature rise is abnormal. It can be activated also externally (from fire control center, reception, ...).
+The fire alert screen is activated when abnormal temperature or fire conditions are detected.
-During Fire alert panel periodically beeps.
+  * **Critical alert display** – red fire warning
+  * **System-triggered event** – can be activated locally or from central systems (e.g. fire alarm panel)
+  * **Continuous alerting** – periodic acoustic signal
-Fire alert cannot be dismissed from in-room panel.
+**Note:** Fire alarm cannot be dismissed from the room panel.
-<WRAP group>
-<WRAP 600 px column>
 {{:wiki:02_hiq-hotel:01_grms:02_tgp_panels:in-room_fire-allert.png?500|}}
-</WRAP>
+----
-\\
+===== Notes =====
-<WRAP column>
+The room panel integrates multiple functionalities into a single device:
+  * Comfort control (HVAC, lighting)
+  * Guest interaction (QR access, touch interface)
+  * Service communication (DND / MUR, door-bell)
+  * Safety alerts (SOS, fire alarm)
-</WRAP>
+This reduces the need for multiple wall-mounted devices and improves both user experience and operational efficiency.
-</WRAP>