Controller IP settings []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Controller IP settings ======

Download and unzip: [[https://www.cybrotech.com/wp-content/uploads/2022/01/CyBroBinLoader-v3.0.5.zip|CyBroBinLoader]]

From unzipped folder run "CyBroBinLoader.exe"

Connect controller and PC (laptop) to:
    - **LAN** (Router with DHCP server) **OR**
    - **Direct** (just cable between PC and controller)

<WRAP group>
<WRAP 310px column>

|< 300px 30px >|
^  1  | Select network adapter                                                |
^  2  | Select "Direct connection" if controller is directly connected to PC  |
^  3  | Select controller NAD                                                 |
^  4  | Configure IP settings                                                 |
^  5  | Send settings to controller                                           |

</WRAP>

<WRAP column>

{{:wiki:99_common:set_ip.png?nolink|}}

</WRAP>
</WRAP>