FC-1-IQ []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== FC-1-IQ ======

**HVAC controller**

<WRAP column 450px>

{{  hiq_components:fc-1-iq_main_picture.png }}
 
</WRAP>

<WRAP column 300px>

| Model number: ^ FC-1-IQ                    |
| Mounting:     | inside fan-coil |
| Dimensions:   | 108x86x46mm                 |


</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * 3 speed fan
  * 2 valves
    * binary/analog input
    * temperature input
  


===== General description =====

Simple - No adjustments, no jumpers or DIP switches. Configuration is completely performed on PC.
Flexible - Can be used with a wide range of home, office and industrial convectors.
Fallback mode - Device continue operation even in case that communication is broken. 

<WRAP pagebreak></WRAP>

===== Technical specification =====

| Relay outputs:     |     3A/250V |
| Temperature measurement: |  external |
| External temperature sensor:            |                      ES any model |
| Power supply:      |                          24V 45mA |
| Operating temperature:   |                       0..45°C |
| Storage temperature:     |                     -20..75°C |
| Relative humidity:       |                    0..95% n/c |
| Weight:       |                    150g |
| Standards:       |                    EN 60730-1 |

===== Terminals =====



{{hiq_components:fc-1-iq_terminals.png }}


<WRAP clear></WRAP>