Table of Contents

Single phase power-sensor, CT

1-phase power-sensor, current transformer

Model number: PM1-E-D-CT
Connect to: RDC Charger
RS485 power sensor bus A - B
Mounting: DIN rail, 1M, 18 mm
Dimensions: 18 × 62 × 119 mm
Used for measuring power and energy of
single-phase energy sources
single-phase energy consumers

Applications

Features

General description

The PM1-E-D-CT series is an advanced single phase energy monitoring solution with built-in configuration push button and LCD data display. Particularly indicated for metering active energy and other power parameters. Housing for DIN-rail mounting, IP51 protection degree.

Technical specifications

Technical Data
Operating Humidity ≤ 75%
Storage Humidity ≤ 95%
Operating Temperature -20°C - +50°C
Storage Temperature -30°C - +70°C
International Standard IEC 62053-21
Accuracy Class 1
Mounting DIN rail (DIN 43880)
Sealing IP51 Indoor
Nominal Voltage Input (Ph+N) 230V AC (176-276V AC)
Max Continuous Voltage 120% of nominal
AC Voltage Withstand 4KV for 1 minute
Impulse Voltage Withstand 6KV-1.2μS
Current Input 0.25-5A(6)A AC RMS
Operational Current Range 0.4% Ib-Imax
Over current withstand 20Imax for 0.01s
Nominal Input Current Burden 0.5VA
Frequency 50Hz(±10%)
Power Consumption ≤ 2W/10VA/phase
Accuracy
Voltage, Current 0.5%
Frequency 0.2% of Mid-Frequency
Power Factor 1% of Unity (0.01)
Active Power, Apparent Power ≤ 1% of Range Maximum
Reactive Power ≤ 1% of Range Maximum
Reactive Energy (Varh) Class 2
Active Energy (Wh) Class 1
Current transformer
Frequency 50-60 Hz
Rated current 50 A
Accuracy from 20% to 120% of rated current
Phase angle less than 2 degrees at 50% of rated current
Insulation voltage 600 VAC
Maximum primary voltage 5000 VAC (insulated conductor)
Dielectric strength 2.5 kV/1mA/1min
Operating temperature -15 to 60°C
Operating humidity < 85 %
Case material PC/UL94-V0
Bobin PBT
Core Permalloy
Internal structure Epoxy
Leads UL 1015, Twisted pair, 22 AWG
Modbus
Bus Type RS485 (Semi-Duplex)
Protocol Modbus RTU
Baud Rate 1200/2400/4800/9600bps
Address Range 1-247
Max. Bus Loading 64pcs
Communication Distance 1000 Meters
Parity EVEN/ODD/NONE
Data Bit 8
Stop Bit 1

Dimensions

Terminals

Downloads

hiq_pm1-e-d-ct_user_manual_2020_v1.0.pdf hiq_pm1-e-d-ct_protocol_v1.2.pdf