Table of Contents
TGP touch panel
Corridor
The panel in the corridor displays the hotel logo, room number and, in the bottom line, the status of the access code reader, the DND or MUR icon and the door-bell button.
| 1 | Hotel Logo |
|---|---|
| 2 | Room number |
| 3 | Access code reader status |
| 4 | DND / MUR status |
| 5 | Door-bell button |
| Access code reader type | DND / MUR status | Door-bell button |
|---|---|---|
 QR code & RFID card reader |  No DND or MUR |  Door-bell enabled |
 RFID card reader |  DND active |  Door-bell disabled |
 Keypad (touch to show keypad) |  MUR active |
In room
Idle screen
| Day time | Night / Low-light |
|---|---|
 |  |
Main screen
| 1 | Previous screen |
|---|---|
| 2 | Idle screen |
| 3 | Next screen |
| 4 | Toggle DND (Do Not Disturb) |
| 5 | Toggle MUR (Make Up Room) |
| 6 | Unlock door |
| 7 | Scene “All off” |
| 8 | Scene “Soft” |
| 9 | Scene “Full” |
HVAC screen
| 1 | HVAC Set-point temperature increment / decrement |
|---|---|
| 2 | HVAC Fan limit increment / decrement |
| 3 | Toggle Bath ventilation |
Lights screen
| 1 | Toggle light ON / OFF |
|---|
Dimmers & Blinds screen
| 1 | Slide to set lightness |
|---|---|
| 2 | Toggle light ON / OFF |
| 3 | Slide to set blinds setpoint (left = closed) |
| 4 | Stop blinds |
Wake-up screens
Setup
| 1 | Toggle wake-up alarm ON / OFF |
|---|---|
| 2 | Set wake-up time |
| 3 | Set wake-up |
| 4 | Toggle wake-up scene |
Alarm
| 1 | Snooze wake-up alarm |
|---|---|
| 2 | Turn off wake-up alarm |
Door-bell screen
Door-bell screen is activated when door-bell button on corridor panel is pressed.
When the door-bell is activated, the beeper beeps briefly.
| 1 | Close door-bell screen |
|---|---|
| 2 | Unlock door |
SOS screen
SOS screen is activated when an SOS pull-switch is activated.
During SOS panel periodically beeps.
| 1 | Dismiss off SOS alarm |
|---|
Fire-alert screen
Fire alert screen is activated when temperature rise is abnormal. It can be activated also externally (from fire control center, reception, …).
During Fire alert panel periodically beeps.
Fire alert cannot be dismissed from in-room panel.