Table of Contents

GRMS - Budget

Functionalities

Room mode The operation of devices (HVAC, lighting, power, shades, etc.) adjusts according to the room status (vacant, rented, guest in room, etc.).
Door bell The doorbell is triggered on the panel outside the door and signals on the touch panel inside the room.
Smart presence Presence is detected in a non-invasive manner using an entrance door sensor and a motion sensor in the room.
DND/MUR DND / MUR is triggered on the touch panel in the room and displayed on the Assa Abloy panel in front of the room, as well as on the web application at the reception or back office.
SOS The functionality of SOS call is integrated into the room touch panel and is signaled on the web application at the reception or back office.
Fire alert A sudden rise in temperature can also serve as a warning of a potential fire. The alarm is displayed on the touch panel in the room and on the web application.
Power supply management Two-tier device power management. “Booked” devices are powered on when the room is rented, while “guest” devices are powered only when the guest is in the room.
Ventilation Ventilation operates in conjunction with the bathroom lighting (with a delayed on and off) and periodically when the room is not rented.
Wake-up alarm The wake-up alarm function is integrated into the touch panel and allows for a comfortable wake-up by opening the shades and turning on preset lights.
Lights The welcome light automatically turns on when a guest enters the room. The rest of the lighting is powered off when the room is empty.
HVAC The heating and cooling system adjusts to the room's conditions to provide a high level of comfort to guests, while maximizing energy savings when the room is unoccupied or not rented out.
Access management Access control allows easy and comfortable access for guests and authorized personnel using QR codes, RFID cards, or by entering a PIN code on a keypad integrated into the touch panel located at the entrance.

BOQ

Label Description Order code qty/room
MC Master controller MC-230-W 1 ×
FC Fan-coil controller FC-1-IQ 1 ×
PS Power supply 24 VDC PS-30-24 1 ×
TGP Touch panel TGP-4A-01-IQ 1 + 1 optional
ES Temperaure sensor ES-W-OW-WHITE 1 ×
MS Motion sensor IR-C6-LC 1 ×
EL Electric door lock EL-ST 1 ×

Wiring diagram