Smart Presence
Smart Presence – Wiring Diagram
The diagram shows the wiring of the Smart Presence setup, including a PIR sensor and a door contact connected to the system inputs.
Two input modules (IX) are used:
- PIR IX – connected to the PIR00 presence sensor
- DOOR IX – connected to the door contact
Power supply is provided via:
- X+ / X- – 24V DC supply distributed to the devices
Connections:
- PIR00 sensor – connected with three wires (+, C, NO) for power and signal output
- Door contact – connected via dry contact (C, NO) for door status detection
Cable types are indicated:
- 3×0.5 – for PIR sensor connection
- 2×0.5 – for door contact connection
This diagram defines a basic presence detection setup, combining motion detection and door status to enable occupancy-based control logic.
