Table of Contents

Bio-24PWM

12 dig inputs, transistor outputs, 4 fast counter inputs, 6 PWM outputs

bio-24r_main_picture.jpg

Model number: Bio-24PWM
Mounting: DIN rail, 6M, 106 mm

Features

Technical specification

Input type 24V 7mA, opto isolated, bidirectional
Operating conditions 0..50°C, 0..85% rh non-condensing
Degree of protection IP20
Installation category II
Level of ambient pollution 2
Standards EN 61010-1, EN 61010-2-201, EN 61131-2
Pulse counter IX0..IX3 (4 independent counters)
Input frequency max. 1kHz, 50% duty cycle
Output type PNP transistor 30V 1A
Protection overload, short circuit and reverse supply
PWM outputs QX0..QX5 (6 independent outputs)
PWM frequency 250Hz or 500Hz, software selectable
PWM range 0..100% in 40 steps (250Hz), 0..100% in 20 steps (500Hz)
Power supply 24V (18..28V), 80mA
Galvanic isolation 4kV between inputs and internal circuit
4kV between internal circuit and output transistors
Weight 270g

Terminals

Dimensions