====== Smart Presence ======

===== Smart Presence – Wiring Diagram =====

The diagram shows the wiring of the Smart Presence setup, including a PIR sensor and a door contact connected to the system inputs.

Two input modules (**IX**) are used:
  * **PIR IX** – connected to the PIR00 presence sensor
  * **DOOR IX** – connected to the door contact

Power supply is provided via:
  * **X+ / X-** – 24V DC supply distributed to the devices

Connections:
  * **PIR00 sensor** – connected with three wires (+, C, NO) for power and signal output
  * **Door contact** – connected via dry contact (C, NO) for door status detection

Cable types are indicated:
  * **3x0.5** – for PIR sensor connection
  * **2x0.5** – for door contact connection

This diagram defines a basic presence detection setup, combining motion detection and door status to enable occupancy-based control logic.


{{:wiki:02_hiq-hotel:01_grms:01_installations:presence.png?nolink|}}