====== WD-1 ======

**Wireless DALI-to-DALI bridge**

<WRAP column 400px>

{{hiq_components:wd-1_main_picture.png  }}

</WRAP>


|Model number: ^ WD-1|



===== Features =====

  * wireless DALI-to-DALI bridge
  * replacement for DALI wiring
  * wired/wireless combinations
  * multiple ballasts per bridge
  * internal DALI power supply
  * very long range, no hopping
  * protected private connection
  * multiple addressable groups 

===== Technical specification =====
 DALI
| DALI power supply:          |                       internal, 18V 20mA |
| Ballasts per adapter:    |                                    5 (2mA) or 10 (1mA) |
| Bus length: |                               50m max. |
| Galvanic isolation:   |                               4kV DALI to mains (SELV) |
| 230V tolerance:     |                              no | 
 Radio  
| Frequency band:         |                       868MHz (EU), 915MHz (US) |
| Modulation          |      FSK, 80kHz bandwidth |
| Group address     |      32-bit, automatically generated |
| Connection time    |      10s power-on to network ready |
| Output power    |      25mW |
| Minimum distance    |      3m between devices |
| Operating range   |      300m with optical visibility |

 General
| Power supply         |                       230V, 50..60Hz, 2W |
| Terminals          |      0.25..1.5mm2 |
|Operating conditions        |               -20..+40°C, 0..85% rh nc |
|Storage temperature                 |  -40..+85°C |
|Weight             |  80g |
|Degree of protection      |    IP20 |
|Standards           |  EN60730-1, EN300-220-2 |



===== Dimensions and mounting =====

{{:hiq_components:wd-1_dimensions.png?550|}}

Device should not be installed inside the metal cabinet.
Distance from antenna to the nearest object should be at least 10cm.


===== Operating range =====

{{:hiq_components:wd-1_max distance.png?550|}}

===== Groups =====

{{:hiq_components:wd-1_groups.png?770|}}

===== Configuration =====

{{:hiq_components:wd-1_configurator.png?770|}}