====== TH-1T-IQ ====== **Touch room thermostat** {{ hiq_components:th-1t-iq_main_picture.png }} | Model number: ^ TH-1T-IQ | | Mounting: | on-wall, 3M rectangular box | | Dimensions: | 122×80×23mm | ===== Applications ===== * room / heating zone thermostat ===== Features ===== * alternate setpoint * fan options: * manual fan speed * fan speed limits * fan-max with time limitation * night mode * various sensor options: * internal * external * remote ===== General description ===== TH-1T-IQ module belongs to room/zone thermostat controllers. It can be used for any heating and/or cooling system including: fan-coils, hot water or electrical radiators, ceiling fans, floor/ceiling heating/cooling, split AC. TH series provide maximum comfort and energy saving functionality. Set-points are selectable on the unit or through other devices. Advanced functionality including smart-phone operation, internet operation, scheduling, HIQ automations, automatic weather response and more are provided when connected to HIQ Home Controller and HIQ universe. ===== Technical specification ===== | Window switch input: | internal pull-up 12V, 2mA | | Temperature measurement: | internal or external ES/ES-A | | Power supply: | 24V/15mA | | Ingress protection: | IP20 | | Operating temperature: | 0..45°C | | Storage temperature: | -20..75°C | | Relative humidity: | 0..95% n/c | ===== Terminals ===== | IEX2 BUS ^ +24V | IEX2 bus | | ::: ^ CANH | ::: | | ::: ^ CANL | ::: | | ::: ^ GND | ::: | | Window magnetic switch ^ IX0 | Digital input | | ::: ^ GND | ::: | | External temperature sensor ES / ES-A ^ TS1 | Temperature sensor input | | ::: ^ GND | ::: | {{hiq_components:th-1t-iq_terminals.png }} When installing: "Autoaddress" button will link [[HiQ:Components:FC-1-IQ]] unit with lowest serial number with thermostat with lowest serial number and so on.