====== TS-H======

**Temperature and humidity sensor**

<WRAP column 500px>

{{  hiq_components:ts,ts-h_main_picture.png  }}
 
</WRAP>

<WRAP column 300px>

| Model number: ^ TS-H                                    |


</WRAP>

<WRAP clear></WRAP>

===== Features =====

    * IEX-2 module
    * temperature and humidity sensor
    * 1 temperature sensor input

===== Technical specification =====
| Temperature measurement: |         range: 0°C to +50°C |
|                          |  error: ±0.5°C typ. (0°C to +50°C) |
|           |                   ±2°C max. (0°C to +50°C) |
|    |                        resolution: 0.1°C (12 bit) |
|  |                     readout: 0.1°C (254 equals 25.4°C) |
| Humidity measurement: |         range: 0..100% rh, non-condensing |
|                          |  error: ±2% rh @ 25°C |
|           |                   stability ±1% rh @ 50% rh in 5 years |
|    |                        resolution 1% (7 bit) |
|  |                     readout 1% rh (45 equals 45% rh) |
| External temperature sensor:   |                   ES-P, ES-B or ES-W |
| Power supply:     |                  24V (18..28V), 15mA |
| Operating conditions:     |                  0..50°C, 0..85% rh non-condensing |
| Degree of protection:     |                  IP20 |
| Storage temperature:     |                  -20..75°C |
| Weight:     |                  80g |
| Standards:     |                  EN 60730-1|

<WRAP pagebreak></WRAP>

===== Terminals =====

<WRAP column 250px>

{{  hiq_components:TS,TS-H_terminals.png  }}
 
</WRAP>

===== Dimensions =====

<WRAP column 350px>

{{  hiq_components:TS,TS-H_dimensions.png  }}
 
</WRAP>

===== Mounting =====

<WRAP column 300px>

{{  hiq_components:TS,TS-H_mounting.png  }}
 
</WRAP>