====== Bio-24PWM ======

** 12 dig inputs, transistor outputs, 4 fast counter inputs, 6 PWM outputs**

<WRAP column 500px>

{{hiq_components:bio-24r_main_picture.jpg}}

</WRAP>

<WRAP column 300px>

| Model number: ^   Bio-24PWM      |
| Mounting:     | DIN rail, 6M, 106 mm |


</WRAP>

<WRAP clear></WRAP>

===== Features =====


      * IEX-2 module
     
      
<WRAP pagebreak></WRAP>



===== Technical specification =====

| Input type               |   24V 7mA, opto isolated, bidirectional|
| Operating conditions        |   0..50°C, 0..85% rh non-condensing|
| Degree of protection      |                         IP20|
| Installation category     |                         II|
| Level of ambient pollution|                         2|
| Standards   |                 EN 61010-1, EN 61010-2-201, EN 61131-2|
| Pulse counter|                        IX0..IX3 (4 independent counters)|
| Input frequency         |                        max. 1kHz, 50% duty cycle|
| Output type           |                          PNP transistor 30V 1A|
| Protection                    |            overload, short circuit and reverse supply|
| PWM outputs        |                         QX0..QX5 (6 independent outputs)|
| PWM frequency	                |                      250Hz or 500Hz, software selectable|
| PWM range                    |                   0..100% in 40 steps (250Hz), 0..100% in 20 steps (500Hz)|
| Power supply   |                   24V (18..28V), 80mA|
|Galvanic isolation|                   4kV between inputs and internal circuit|
|                         |                   4kV between internal circuit and output transistors|
|Weight|                  270g|
===== Terminals =====



<WRAP column 720px>

{{hiq_components:bio-24pwm_terminals.png}} 

</WRAP>
===== Dimensions =====

{{hiq_components:bio-24r_dimensions.png}}