====== TGP-4D-01-IQ ======
==== Touch HMI, Black frame ====

<WRAP column 400px>

{{:hiq_components:tgp-wiki.png?400|}}

</WRAP>

<WRAP column 430px>


| Model number:  ^ TGP-4D-01-IQ                          ^
| Mounting:      | in-wall, UK dose or  fi 60 flush box  |

</WRAP>

<WRAP clear></WRAP>

===== General description =====
TGP-4D-01-IQ is a 4-inch graphic panel with capacitive touch, designed for Cybro/HIQ building automation systems. It features a high-resolution TFT display, internal beeper, adjustable backlight brightness, and RS485 communication.



===== Features =====

  * graphic panel 4"
  * capacitive touch
  * internal beeper
  * dimmable background
  * RS485 interface
  * fully configurable
   




===== Technical specification =====

| Power supply:             | 5-36V DC / 260 mA                  |
| Display:                  | TFT 4.0 inch                       |
| Resolution:               | 480 × 480                          |
| Brightness (cd/m²:        | 250                                |
| Contrast:                 | 800:1                              |
| Colour:                   | 65K colour, 16-bit RGB             |
| Active Area  L x W :      | 71.9mm x 70.2mm                    |
| Installation  :           | support rotation 0°/90°/180°/270°  |
| Touch type  :             | capacitive                         |
| Communication  :          | RS485 (to MC Controller or Cybro)  |
| Operating temperature  :  | -20°C to 70°C                      |




===== Terminals and Dimensions =====
{{:hiq_components:tgp-4-back-side.png?500|}}
{{:hiq_components:tgp-4-dimension.png?500|}}

==== Back side of TGP-4D-01-IQ display: ====


  * GND
  * A (RS485)
  * B (RS485)
  * VCC (power input)

**Connection via TGP-S adapter:**

Adapter provides IEX bus (CANL/CANH), power distribution, and TS input for external temperature sensor (orange terminals)



===== Connection methods=====
{{:hiq_components:tgp-4-connection_methods.png?400|}}




===== Mounting =====

Exclusively flush-mounted (recessed) installation in ø60 mm round flush junction box (fi 60 / circular in-wall box). Secured with two 3.5 mm screws. For basic RS485 communication and IEX-2 bus connection, the TGP-S adapter is not required – the device can connect directly to the controller. The TGP-S adapter is required only if an external temperature sensor is used (connected to the TS input on the adapter). The sensor is optional.