====== FC-3 ====== **HVAC controller** {{:components:fc-3.png?400|}} | Model number: ^ FC-3 ^ | Mounting: | inside fan-coil | | Dimensions: | 65x30x18mm | ===== Features ===== * IEX-2 module, fan-coil controller * Virtual serial port (Modbus) * 1 analog output 0..10V (fan speed) * 2 outputs 24V 1A (valve control) * 1 binary input (window switch) * 1 temperature sensor input ===== Technical specification ===== | Serial interface: | RS485 virtual serial port | | Baudrate: | 2400..115200 bps | | Galvanic isolation: | none | | Analog output: | 0..10V, 10mA sink/source | | Settling time: | 0..10s, adjustable | | Digital input: | dry contact, internal pull-up 12V 2mA | | Digital output: | 24V, 1A, high side | | Output protection: | short circuit, overheating, inductive load | | External temperature sensor: | ES digital sensor | | Cable length: | 50m | | Power supply: | 24V (18..28V), 20mA + valve | | Terminals: | push-button cage clamp 3.5mm | | Wire diameter: | stranded 0.2..1.5mm², solid and ferrule 0.2..1mm² | | Operating conditions: | 0..50°C, 0..85% rh | | Degree of protection: | IP20 | | Dimensions: | 65x30x18mm | | Weight: | 20g | | Standards: | EN 61010-1, EN 61010-2-201, EN 61326-1 | ===== Terminals ===== {{:components:fc-3-wiring.png?400|}} {{:components:fc-3-valve-control.png?400|}} {{:components:fc-3-modbus-fan-control.png?400|}} {{:components:fc-3-0-10v-fan-coil.png?400|}} {{:components:fc-3-mounting.png?400|}}