====== EL-N ======
==== Electromechanical strike lock, narrow ====

<WRAP column 450px>

{{hiq_components:el-n.jpg?200|}}

</WRAP>

<WRAP column 300px>


| Model number:  ^ EL-N  ^

</WRAP>
<WRAP clear></WRAP>


===== General Description =====

The EL-N is a compact electric strike, reversible flush-mounted electric strike designed for secure door access control, featuring adjustable jaw flexibility and compatibility with various AC/DC voltage ranges for reliable operation in diverse environments.




===== Technical Specifications =====
| Installation               | Flush          |
| Reversible                 | Yes            |
| Height                     | 66 mm          |
| Width                      | 20,50 mm          |
| Depth                      | 25,50 mm          |
| Jaw Depth                  | 4.70 mm        |
| Flex Jaw Adjustment        | +2 - 1 mm       |
| Tested Cycles              | 200,000        |
| Temperature Working Range  | -25°C to 50°C  |
| Breaking Resistance        | 3,500 N        |



===== Electromechanical data =====

| Voltage Range (V)  | Functioning  | Coil Resistance (Ω)  | Electric Duty Cycle (%ED)  | AC Current Consumption (mA)  | DC Current Consumption (mA)  | Maximum Preload Open AC  | Maximum Preload Open DC  |
| 24 (424) DC        | Fail Secure  | 132                  | 100% ED 24 VDC             |  -                           | 200                          |  -                       |  -                       |
| 24 (524) DC        | Fail Secure  | 230                  | 100% ED 24 VDC             |  -                           | 110                          |  -                       |  -                       |

Coil tolerance: ±5%





===== Dimensions =====
{{hiq_components:el-n_dimensions.png?600|}}




===== Electric and monitored Connections =====

{{hiq_components:el-n_electric.png?400|}}

=== Electric connections ===

  * Electric strikes work usually without polarity. A diode can be installed to work with polarity




===== Installation instructions =====

{{hiq_components:el_mounting.png?400|}}

=== Generic installation ===

      * Before starting connection, please check the electrical features as well as the voltage and the current strenght of the power supply.
      * Follow the manual and connect the cable as indicated on the diagram.
      * Fit in the electric strike on the plate using screws.
      * Fit in the assembly electric strike and plate to the door frame using screws.
      * Adjust if it is necessary flex system.
      * Use the electric strike.

=== Caution===

Electric strike could be damaged in some wrong using conditions:
      * Voltage is higher than rated. Check voltage output before installation.
      * Do not oil or lubricate the electric strike, this could damage internal parts.
      * Paint, dirty or wet may aect to the electric strike functions
===  Manufacturer Documentation ===

Official manufacturer manual (PDF):
{{ hiq_components:electric_strikes_99nf_top_tech_data.pdf |}}