LC-DC2-ISO []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== LC-DC2-ISO======

** IEX-2 module, DALI-2 application controller **

<WRAP column 450px>

{{hiq_components:lc-dc2_mainpicture.png}}

</WRAP>

<WRAP column 300px>

| Model number: ^   LC-DC2-ISO      |
| Mounting:     | DIN rail |


</WRAP>

<WRAP clear></WRAP>

===== Features =====


      * IEX-2 module
      * DALI-2 application controller
      * DALI-2 multi-master
      * send and receive DALI power supply
      * 10 digital inputs
      * galvanic isolation
      
     
      
<WRAP pagebreak></WRAP>



===== Technical specification =====

| DALI output current               |   200mA|
| Ballasts per device        |   64 (2mA per device)|
|Bus length   |                         300m|
|Galvanic isolation      |                         3kV, DALI to digital ground|
|Surge protection      |                         4kW (8/20us), 30kV/150pF|
| Autoaddress|                         no|
| Typical usage                    |           office buildings and halls|
| Duty cycle               |                         1:10 (DALI active 10% of the time)|
| Load protection	                |                     short-circuit and thermal shutdown|
|230V tolerance                |                   no|
|Input type                 |                   dry contact, internal pull-up 12V 2mA|
| Power supply             |                   24V (18..28V), 200mA|
|Operating conditions|                   0..45°C, 0..95% rh non-condensing|
| Storage temperature                  |                   -20..75°C|
| Degree of protection                  |                   IP20|
| Weight                  |                   120g|
| Standards                |                   EN 60730-1, EN 61000-4-4|

===== Terminals =====



<WRAP column 950px>

{{hiq_components:lc-dc2_terminals.png}} 

</WRAP>
===== Dimensions =====

{{hiq_components:air-12_dimensions.png}}