CR-D1 []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== CR-D1 ======

**RFID, QR code code readers, iBeacon transmitter, 4“ graphical touch display**

<WRAP column 450px>

{{:hiq:components:cr-d1.png?nolink|}}

</WRAP>

<WRAP column 300px>

| Model number:  ^ CR-D1           ^
| Mounting:      | Field, on wall  |


</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * touch display 4"
  * RFID card reader
  * QR code reader
  * iBeacon transmitter
  * temperature sensor
  * digital output for door lock
  * digital input for door sensor
  * digital input for PIR sensor
  * 2 spare digital inputs
===== Technical specification =====

^ RFID reader                                                     ^^
| Tag frequency         | 125kHz                                   |
| Reading distance      | 0..5cm                                   |
| Output format         | 32-bit binary                            |
^ QR reader                                                       ^^
| 2D formats            | QR, Data Matrix, PDF417                  |
| 1D formats            | EAN13, UPCA, UPCE0/1                     |
| Reading distance      | 1.5..15cm                                |
| Environment light     | 50 lux..100,000 lux                      |
| Decoding time         | 400ms                                    |
| Optimal QR size       | 22x22mm                                  |
| Output format         | plain text                               |
^ Beacon                                                          ^^
| Bluetooth protocol    | BLE 5.0                                  |
| Frequency band        | 2.4GHz                                   |
| Broadcast range       | 5m                                       |
| Advertising interval  | 500ms                                    |
| Local name            | CYBRO                                    |
^ Touch display                                                   ^^
| Diagonal Resolution   | 10cm (4")                                |
| Resolution            | 480x480 TFT                              |
| Touch panel           | capacitive                               |
| Interface             | RS485 115200 8n1                         |
| Cable length          | n/a (D1, D2), 100m (D3)                  |
| Digital input                                                   ||
| Input type            | dry contact, internal pull-up 12V 2mA    |
| Cable length          | 50m                                      |
^ Door lock output                                                ^^
| Voltage               | 12V or 24V, software adjustable          |
| Output current        | 500mA                                    |
| Protection            | short circuit, overvoltage, overheating  |
| Cable length          | 50m                                      |
^ PIR sensor                                                      ^^
| Input type            | dry contact, internal pull-up 12V 2mA    |
| Power output          | 12V 25mA                                 |
| Protection            | short circuit, overheating               |
| Cable length          | 50m                                      |
^ General                                                         ^^
| Power supply          | 24V (18..28V), 85mA (+door lock)         |
| Terminals             | push-button cage clamp 3.5mm             |
| Wire diameter         | stranded 0.2..1.5mm2, solid to 1mm2      |
| Operating conditions  | 0..45°C, 0..85% rh non-condensing        |
| Storage temperature   | -20..75°C                                |
| Degree of protection  | IP20                                     |
| Dimensions            | 98x200x29mm                              |
| Weight                | 350 g                                    |
===== Terminals =====

{{:hiq:components:terminals.png?nolink&500|}}
===== Dimensions & Mounting =====

{{:hiq:components:dimensions_l.png?nolink&500|}}

===== TGP app =====

[[.:cr-d-tgp_app|]]