SW-W3-IW []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== SW-W3-IW ======


<WRAP column 450px>

{{:hiq_components:sw-w3-iw_main_picture.png|}}


 
</WRAP>

<WRAP column 300px>

| Model number: ^ SW-W3-IW                                      |
| Mounting:     | in-wall, in junction box behind scene buttons |

</WRAP>

<WRAP column 400px>

===== Applications =====

  * 4 Push buttons or Motion sensor inputs
  * Individual light / dimmer button
  * Blinds up/down button

</WRAP>

<WRAP clear></WRAP>

===== Features =====

  * configurable button action:
    * on/off
    * dimmer push button (on/off and 0..100%)
    * blinds up/down

===== General description =====

SW-W3-IW is in wall compact remote input module. Any kind of push-button design can be used. 

<WRAP pagebreak></WRAP>

===== Technical specification =====

| LED outputs:           |         10 mA, PWM dimmable |
| Inputs:                |  internal pull-up 12V, 2 mA |
|                        |  0..10 V (10 bit, 0..1023) or potentiometer |
| Power supply:          |                    24V/35mA |
| Ingress protection:    |                        IP20 |
| Operating temperature: |                     0..45°C |
| Storage temperature:   |                   -20..75°C |
| Relative humidity:     |                  0..95% n/c |
| Standards:             |                  EN 60730-1 |

===== Terminals =====

{{:hiq_components:sw-w3-iw_terminals.png?550|}}

===== Dimensions =====

{{:hiq_components:sw-w3-iw_dimensions.png?550|}}