PM1-E-D []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== PM1-E-D ======

**Single phase power-sensor**

<WRAP column 450px>

{{  hiq_components:pm1-e-d_main_picture.png  |}}

</WRAP>

<WRAP column 400px>

| Model number: ^ PM1-E-D                                      |
| :::           | RS485 power sensor bus A - B                |
| Mounting:     | DIN rail, 1M                         |

^ Used for measuring power and energy of                 ||
| ✔ | single-phase energy sources                        |
| ✔ | single-phase energy consumers                      |

</WRAP>

<WRAP clear></WRAP>

===== Applications =====

  * Digital multi-function power-sensor for single phase networks

===== Features =====

  * DIN rail mounting with direct connection up to 45A
  * Compact design in a single module 18mm wide
  * Seal-able cover(phase and neutral terminals)

===== General description =====


The PM1-E-D series is an advanced single phase energy monitoring solution with built-in configuration push button and LCD data display. Particularly indicated for metering active energy and other power parameters. Housing for DIN-rail mounting, IP51 protection degree, direct connection up to max 45A.

<WRAP pagebreak></WRAP>

===== Technical specifications =====

|< 40% 50% >|
^ Energy Measurements                                                                 ||
| Imported/Exported active energy            |                       0 to 99999.99 kWh |
| Imported/Exported reactive energy          |                     0 to 99999.99 kVArh |
| Total active energy                        |                       0 to 99999.99 kWh |
| Total reactive energy                      |                     0 to 99999.99 kVArh |
^ Measured Inputs                                                                     ||
| Nominal Voltage Input                      |                      (Ph+N) 176 to 276V |
| Max Continuous Voltage                     |                         120% of nominal |
| Nominal Input Current                      |                                  5(45)A |
| Max Continuous Current                     |                         120% of nominal |
| Frequency                                  |                             50Hz (±10%) |
^ Accuracy                                                                            ||
| Voltage                                    |                   0·5% of range maximum |
| Current                                    |                         0·5% of nominal |
| Frequency                                  |                   0·2% of mid-frequency |
| Power factor                               |                      1% of unity (0.01) |
| Active power (W)                           |                    ±1% of range maximum |
| Reactive power (VAr)                       |                    ±1% of range maximum |
| Apparent power (VA)                        |                    ±1% of range maximum |
| Active energy (Wh)                         |                    Class 1 IEC 62053-21 |
| Reactive energy (VARh)                     |                    ±1% of range maximum |
^ Modbus (RS485 Output for Modbus RTU & Pulsed Output)                                ||
| Baud rate                                  |                 1200, 2400, 4800, 9600. |
| Parity                                     |                       none / odd / even |
| Stop bits                                  |                                  1 or 2 |
| RS485 network address                      |                                1 to 247 |
^ Reference Conditions of Inﬂuence Quantities                                         ||
| Ambient temperature                        |                               23°C ±1°C |
| Input waveform                             |                          50 or 60Hz ±2% |
| Input waveform                             |  Sinusoidal (distortion factor < 0·005) |
| Auxiliary supply voltage                   |                             Nominal ±1% |
| Auxiliary supply frequency                 |                             Nominal ±1% |
| Auxiliary supply waveform (if AC)          |   Sinusoidal (distortion factor < 0·05) |
| Magnetic field of external origin          |                         Terrestrial ﬂux |
^ Environment                                                                         ||
| Operating temperature                      |                          -25°C to +55°C |
| Storage temperature                        |                          -40°C to +70°C |
| Relative humidity                          |                0 to 95%, non-condensing |
| Altitude                                   |                             Up to 3000m |
| Warm up time                               |                                1 minute |
| Vibration                                  |         10Hz to 50Hz, IEC 60068-2-6, 2g |
| Shock                                      |                         30g in 3 planes |
^ Mechanics                                                                           ||
| DIN rail dimensions                        |         18mm x 90mm (WxH) per DIN 43880 |
| Mounting                                   |                    DIN rail (DIN 43880) |

===== Terminals =====

{{hiq_components:pm1-e-d_terminals.png  |}}

===== Dimensions =====

{{hiq_components:pm1-e-d_dimensions.png  |}}

===== Download =====

{{hiq_components:hiq_pm1-e-d_user_manual_2020.pdf  |}} {{hiq_components:hiq_pm1-e-d-modbus_protocol_v2.2.pdf  |}}