FC-2-IQ []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== FC-2-IQ ======

**HVAC controller**

<WRAP column 450px>

{{  hiq_components:fc-2-iq_main_picture.png }}
 
</WRAP>

<WRAP column 300px>

| Model number:  ^ FC-2-IQ          ^
| Mounting:      | inside fan-coil  |
| Dimensions:    | 108x86x46mm      |
| Old code:      | FC-2-IQ          |


</WRAP>

<WRAP clear></WRAP>


===== Features =====
    * IEX-2 module, fan-coil controller
    * 1 analog output 0..10V (fan speed)
    * 2 relay outputs 5A (valve)
    * 1 binary/analog input
    * 2 temperature sensor inputs



===== Technical specification =====


| Input type: |  dry contact, internal pull-up 12V 2mA |
|            |                      analog input 0..10V (10 bit, 0..1023) |
| Output type:      |                          0..10V 10mA (7 bit, 0..100%) |
|                  |                       relay 5A/250VAC resistive |
| External temperature sensor:     |                     ES-P, ES-B or ES-W |
| Power supply:       |                    24V (18..28V), 100mA |
|        |                    (25mA+15mA*number of active outputs) |
| Galvanic isolation:       |                   4kV between internal circuit and relay contacts |
| Degree of protection:       |                   IP20 |
| Operating conditions:       |                   0..45°C, 0..95% rh non-condensing |
| Storage temperature:       |                   -20..75°C |
| Weight:       |                   200g |
| Standards:       |                   EN 60730-1 |


===== Terminals =====

<WRAP column 450px>

{{hiq_components:fc-2-iq_terminals.png }}


<WRAP clear></WRAP>