CAD-232-A3-IQ []

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== CAD-232-A3-IQ ======

**BTMS Communication converter**


<WRAP column 350px>



{{hiq_components:cad-232-a3-iq.jpg?600|}}

</WRAP>

<WRAP column 300px>

| Order code:  ^ CAD-232-A3-IQ        ^
| Mounting:    | DIN rail, 2M, 36 mm  |
| Dimensions:  | 36x107x58mm          |

</WRAP>
<WRAP clear></WRAP>

===== Highlights & Features =====

  * RS-232 to RS-485 converter, RJ9 to terminals
  * Galvanic isolation: power supply/232 to 485

===== Technical specification =====


| Baud rate                   | 19200 (2400..115200)               |
| Galvanic isolation          | 1.5kV, 24V/232 to 485              |
| RS485 termination           | 120 Ohm, 1V offset                 |
| RS485 transmit enable       | automatic                          |
| Power supply                | 24V (18..28V), 50mA                |
| Operating conditions        | 0..50°C, 0..85% rh non-condensing  |
| Mounting                    | DIN rail (35mm)                    |
| Degree of protection        | IP20                               |
| Dimensions                  | 36x107x58mm                        |
| Weight                      | 65g                                |
| Level of ambient pollution  | 2                                  |
| Standards                   | EN 60730-1                         |

===== Bus Connection Cable =====
{{hiq_components:cad-px.jpg?400|}}



  * The product includes a 2.5 cm RJ9-to-RJ9 bus cable (Order code: CAD-P0) for connection to controllers, allowing the units to be linked together.
  * Longer cable versions are available under order codes CAD-Px.