User Tools

Site Tools


wiki:21_hiq_components:wd-1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
wiki:21_hiq_components:wd-1 [2026/03/16 10:26] – ↷ Page moved from hiq_components:wd-1 to wiki:21_hiq_components:wd-1 goran.kocjancicwiki:21_hiq_components:wd-1 [2026/03/16 15:01] (current) – removed goran.kocjancic
Line 1: Line 1:
-====== WD-1 ====== 
  
-**Wireless DALI-to-DALI bridge** 
- 
-<WRAP column 400px> 
- 
-{{hiq_components:wd-1_main_picture.png  }} 
- 
-</WRAP> 
- 
- 
-|Model number: ^ WD-1| 
- 
- 
- 
-===== Features ===== 
- 
-  * wireless DALI-to-DALI bridge 
-  * replacement for DALI wiring 
-  * wired/wireless combinations 
-  * multiple ballasts per bridge 
-  * internal DALI power supply 
-  * very long range, no hopping 
-  * protected private connection 
-  * multiple addressable groups  
- 
-===== Technical specification ===== 
- DALI 
-| DALI power supply:          |                       internal, 18V 20mA | 
-| Ballasts per adapter:    |                                    5 (2mA) or 10 (1mA) | 
-| Bus length: |                               50m max. | 
-| Galvanic isolation:                                 4kV DALI to mains (SELV) | 
-| 230V tolerance:                                  no |  
- Radio   
-| Frequency band:                               868MHz (EU), 915MHz (US) | 
-| Modulation          |      FSK, 80kHz bandwidth | 
-| Group address          32-bit, automatically generated | 
-| Connection time    |      10s power-on to network ready | 
-| Output power    |      25mW | 
-| Minimum distance    |      3m between devices | 
-| Operating range        300m with optical visibility | 
- 
- General 
-| Power supply                               230V, 50..60Hz, 2W | 
-| Terminals          |      0.25..1.5mm2 | 
-|Operating conditions        |               -20..+40°C, 0..85% rh nc | 
-|Storage temperature                  -40..+85°C | 
-|Weight              80g | 
-|Degree of protection      |    IP20 | 
-|Standards            EN60730-1, EN300-220-2 | 
- 
- 
- 
-===== Dimensions and mounting ===== 
- 
-{{:hiq_components:wd-1_dimensions.png?550|}} 
- 
-Device should not be installed inside the metal cabinet. 
-Distance from antenna to the nearest object should be at least 10cm. 
- 
- 
-===== Operating range ===== 
- 
-{{:hiq_components:wd-1_max distance.png?550|}} 
- 
-===== Groups ===== 
- 
-{{:hiq_components:wd-1_groups.png?770|}} 
- 
-===== Configuration ===== 
- 
-{{:hiq_components:wd-1_configurator.png?770|}} 
wiki/21_hiq_components/wd-1.1773656781.txt.gz · Last modified: by goran.kocjancic