Differences

This shows you the differences between two versions of the page.

--- wiki:02_hiq-hotel:01_grms:01_installations:03.smart_presence [2026/03/23 12:15] – goran.kocjancic
+++ wiki:02_hiq-hotel:01_grms:01_installations:03.smart_presence [2026/04/01 07:42] (current) – paulo.krbavcic
@@ Line 1: / Line 1: @@
 ====== Smart Presence ======
+===== Smart Presence – Wiring Diagram =====
+The diagram shows the wiring of the Smart Presence setup, including a PIR sensor and a door contact connected to the system inputs.
+Two input modules (**IX**) are used:
+  * **PIR IX** – connected to the PIR00 presence sensor
+  * **DOOR IX** – connected to the door contact
+Power supply is provided via:
+  * **X+ / X-** – 24V DC supply distributed to the devices
+Connections:
+  * **PIR00 sensor** – connected with three wires (+, C, NO) for power and signal output
+  * **Door contact** – connected via dry contact (C, NO) for door status detection
+Cable types are indicated:
+  * **3x0.5** – for PIR sensor connection
+  * **2x0.5** – for door contact connection
+This diagram defines a basic presence detection setup, combining motion detection and door status to enable occupancy-based control logic.
 {{:wiki:02_hiq-hotel:01_grms:01_installations:presence.png?nolink|}}