Differences

This shows you the differences between two versions of the page.

--- hiq_components:tgp-4d-01-iq [2026/03/13 11:32] – paulo.krbavcic
+++ hiq_components:tgp-4d-01-iq [2026/03/13 11:32] (current) – [Mounting] paulo.krbavcic
@@ Line 79: / Line 79: @@
 ===== Mounting =====
-Exclusively flush-mounted (recessed) installation in ø60 mm round flush junction box (fi 60 / circular in-wall box) or UK dose. Secured with two 3.5 mm screws.
+Exclusively flush-mounted (recessed) installation in ø60 mm round flush junction box (fi 60 / circular in-wall box). Secured with two 3.5 mm screws. For basic RS485 communication and IEX-2 bus connection, the TGP-S adapter is not required – the device can connect directly to the controller. The TGP-S adapter is required only if an external temperature sensor is used (connected to the TS input on the adapter). The sensor is optional.
-For basic RS485 communication and IEX-2 bus connection, the TGP-S adapter is not required – the device can connect directly to the controller.
-The TGP-S adapter is required only if an external temperature sensor is used (connected to the TS input on the adapter). The sensor is optional.