User Tools

Site Tools


hiq_components:lud12-iq

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

hiq_components:lud12-iq [2023/12/18 09:40] – created alen.mejakhiq_components:lud12-iq [2023/12/18 10:01] (current) alen.mejak
Line 12: Line 12:
  
 | Model number: ^ LUD12-IQ               | | Model number: ^ LUD12-IQ               |
-| Connects to:  | [[en:hiq_hw:ld-p4-iq|LD-P4-IQ]] |+| Connects to:  | [[internal:components:LD-P4-IQ]] |
 | Mounting:     | DIN rail, 1M, 18 mm      | | Mounting:     | DIN rail, 1M, 18 mm      |
 | Dimensions:   | 18 × 63 × 87 mm          |  | Dimensions:   | 18 × 63 × 87 mm          | 
Line 32: Line 32:
 ===== General description ===== ===== General description =====
  
-Activation takes place from the [[en:hiq_hw:ld-p4-iq|LD-P4-IQ]]. The output voltage is adjusted from 0-100% depending on the [[en:hiq_hw:ld-p4-iq|LD-P4-IQ]] command.+Activation takes place from the [[internal:components:LD-P4-IQ]]. The output voltage is adjusted from 0-100% depending on the [[internal:components:LD-P4-IQ]] command.
 The activation terminals X1/X2 in the LUD12 are isolated from the mains voltage by an optocoupler. The activation terminals X1/X2 in the LUD12 are isolated from the mains voltage by an optocoupler.
 Automatic load detection, electronic overload protection and over-temperature shutdown are active and independent from activation. Automatic load detection, electronic overload protection and over-temperature shutdown are active and independent from activation.
hiq_components/lud12-iq.1702892440.txt.gz · Last modified: 2023/12/18 09:40 by alen.mejak