Differences

This shows you the differences between two versions of the page.

--- components:wd-1 [2026/03/16 11:36] – removed - external edit (Unknown date) 127.0.0.1
+++ components:wd-1 [2026/03/16 11:36] (current) – ↷ Page moved from hiq:components:wd-1 to components:wd-1 goran.kocjancic
@@ Line 1: / Line 1: @@
+====== WD-1 ======
+**Wireless DALI-to-DALI bridge**
+<WRAP column 400px>
+{{hiq_components:wd-1_main_picture.png  }}
+</WRAP>
+|Model number: ^ WD-1|
+===== Features =====
+  * wireless DALI-to-DALI bridge
+  * replacement for DALI wiring
+  * wired/wireless combinations
+  * multiple ballasts per bridge
+  * internal DALI power supply
+  * very long range, no hopping
+  * protected private connection
+  * multiple addressable groups
+===== Technical specification =====
+ DALI
+| DALI power supply:          |                       internal, 18V 20mA |
+| Ballasts per adapter:    |                                    5 (2mA) or 10 (1mA) |
+| Bus length: |                               50m max. |
+| Galvanic isolation:   |                               4kV DALI to mains (SELV) |
+| 230V tolerance:     |                              no |
+ Radio
+| Frequency band:         |                       868MHz (EU), 915MHz (US) |
+| Modulation          |      FSK, 80kHz bandwidth |
+| Group address     |      32-bit, automatically generated |
+| Connection time    |      10s power-on to network ready |
+| Output power    |      25mW |
+| Minimum distance    |      3m between devices |
+| Operating range   |      300m with optical visibility |
+ General
+| Power supply         |                       230V, 50..60Hz, 2W |
+| Terminals          |      0.25..1.5mm2 |
+|Operating conditions        |               -20..+40°C, 0..85% rh nc |
+|Storage temperature                 |  -40..+85°C |
+|Weight             |  80g |
+|Degree of protection      |    IP20 |
+|Standards           |  EN60730-1, EN300-220-2 |
+===== Dimensions and mounting =====
+{{:hiq_components:wd-1_dimensions.png?550|}}
+Device should not be installed inside the metal cabinet.
+Distance from antenna to the nearest object should be at least 10cm.
+===== Operating range =====
+{{:hiq_components:wd-1_max distance.png?550|}}
+===== Groups =====
+{{:hiq_components:wd-1_groups.png?770|}}
+===== Configuration =====
+{{:hiq_components:wd-1_configurator.png?770|}}