Differences

This shows you the differences between two versions of the page.

--- components:tgp-4a-01-iq [2026/03/16 15:11] – removed - external edit (Unknown date) 127.0.0.1
+++ components:tgp-4a-01-iq [2026/03/16 15:11] (current) – ↷ Page moved from wiki:21_hiq_components:tgp-4a-01-iq to components:tgp-4a-01-iq goran.kocjancic
@@ Line 1: / Line 1: @@
+====== TGP-4A-01-IQ ======
+==== Touch HMI, Black frame ====
+<WRAP column 400px>
+{{:hiq_components:tgp-wiki.png?400|}}
+</WRAP>
+<WRAP column 430px>
+| Model number:  ^ TGP-4A-01-IQ                          ^
+| Mounting:      | in-wall, UK dose or  fi 60 flush box  |
+</WRAP>
+<WRAP clear></WRAP>
+===== General description =====
+TGP-4A-01-IQ is a 4-inch graphic panel with capacitive touch, designed for Cybro/HIQ building automation systems. It features a high-resolution TFT display, internal beeper, adjustable backlight brightness, and RS485 communication.
+===== Features =====
+  * graphic panel 4"
+  * capacitive touch
+  * internal beeper
+  * dimmable background
+  * RS485 interface
+  * fully configurable
+===== Technical specification =====
+| Power supply:             | 5-36V DC / 260 mA                  |
+| Display:                  | TFT 4.0 inch                       |
+| Resolution:               | 480 × 480                          |
+| Brightness (cd/m²:        | 250                                |
+| Contrast:                 | 800:1                              |
+| Colour:                   | 65K colour, 16-bit RGB             |
+| Active Area  L x W :      | 71.9mm x 70.2mm                    |
+| Installation  :           | support rotation 0°/90°/180°/270°  |
+| Touch type  :             | capacitive                         |
+| Communication  :          | RS485 (to MC Controller or Cybro)  |
+| Operating temperature  :  | -20°C to 70°C                      |
+===== Terminals and Dimensions =====
+{{:hiq_components:tgp-4-back-side.png?500|}}
+{{:hiq_components:tgp-4-dimension.png?500|}}
+==== Back side of TGP-4A-01-IQ display: ====
+  * GND
+  * A (RS485)
+  * B (RS485)
+  * VCC (power input)
+**Connection via TGP-S adapter:**
+Adapter provides IEX bus (CANL/CANH), power distribution, and TS input for external temperature sensor (orange terminals)
+===== Connection methods=====
+{{:hiq_components:tgp-4-connection_methods.png?400|}}
+===== Mounting =====
+Exclusively flush-mounted (recessed) installation in ø60 mm round flush junction box (fi 60 / circular in-wall box) or UK dose. Secured with two 3.5 mm screws.
+For basic RS485 communication and IEX-2 bus connection, the TGP-S adapter is not required – the device can connect directly to the controller.
+The TGP-S adapter is required only if an external temperature sensor is used (connected to the TS input on the adapter). The sensor is optional.