User Tools

Site Tools

Trace:
components:fc

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
components:fc [2026/03/16 15:06] – removed - external edit (Unknown date) 127.0.0.1components:fc [2026/03/16 15:06] (current) – ↷ Page moved from wiki:21_hiq_components:fc to components:fc goran.kocjancic
Line 1: Line 1:
 +====== FC ======
 +
 +**HVAC controller**
 +
 +<WRAP column 450px>
 +
 +{{hiq_components:fc.jpg?400|}}
 + 
 +</WRAP>
 +
 +<WRAP column 300px>
 +
 +| Model number:  ^ FC               ^
 +| Mounting:      | inside fan-coil  |
 +| Dimensions:    | 108x86x46mm      |
 +
 +
 +</WRAP>
 +
 +<WRAP clear></WRAP>
 +
 +===== Features =====
 +
 +  * IEX-2 module, fan-coil controller
 +  * 3 relay outputs 5A (fan speed)
 +  * 2 relay outputs 5A (valve)
 +  * 1 binary/analog input
 +  * 2 temperature sensor inputs
 +  
 +
 +
 +===== General description =====
 +
 +Simple - No adjustments, no jumpers or DIP switches. Configuration is completely performed on PC.
 +Flexible - Can be used with a wide range of home, office and industrial convectors.
 +Fallback mode - Device continue operation even in case that communication is broken. 
 +
 +==== Firmware Note for FC Controller ====
 +
 +**Firmware Requirement Notice:** The FC module is delivered unprogrammed, without pre-installed firmware. Users must independently download and install the latest firmware version using Cybrotech's configuration software via PC (USB/RS485 interface). Prior to deployment, verify hardware and hiQ/Cybro system compatibility, following official flashing instructions to ensure stable communication and full functionality—including fallback mode and IQ protocol support. Firmware files and tools are available on the Cybrotech download page.
 +
 +<WRAP pagebreak></WRAP>
 +
 +
 +
 +===== Technical specification =====
 +
 +| Relay outputs:     |     3A/250V |
 +| Temperature measurement: |  external |
 +| External temperature sensor:            |                      ES any model |
 +| Power supply:      |                          24V 45mA |
 +| Operating temperature:   |                       0..45°C |
 +| Storage temperature:     |                     -20..75°C |
 +| Relative humidity:       |                    0..95% n/c |
 +| Weight:       |                    150g |
 +| Standards:       |                    EN 60730-1 |
 +
 +===== Terminals =====
 +
 +
 +
 +{{hiq_components:fc-wiring.jpg?400|}}
 +
 +
 +<WRAP clear></WRAP>