Differences

This shows you the differences between two versions of the page.

--- wiki:20_rdc_charger:20_mounting:start [2023/05/26 13:04] – external edit 127.0.0.1
+++ wiki:20_rdc_charger:20_mounting:start [2024/01/17 13:27] – alen.mejak
@@ Line 13: / Line 13: @@
 REQUIRED EQUIPMENT:
   * Impact hammer and concrete drill ф 8mm
-  * Phillips screwdriver PH2 - Screws for fixing the mounting plate to the wall, screws for mounting the charger to the mounting plate
+  * Phillips screwdriver PH2 - Screws for fixing the mounting plate to the wall
   * SL4 flat screwdriver – Screwing power cables (model without Residual-current device)
   * Phillips screwdriver PZ2 - Screwing the power cables on the RCD (model with Residual-current device)
   * Allen key 2.5mm (included) - For screws of the plastic cover and for switching the RCD(for models with it)
+  * Allen key 3mm - For mounting screws the charger to the mounting plate
   * Pliers for crimping cable glands and shoes
   * Pliers and tools for removing insulation from cables and wires
- **Lean the mounting plate against the wall and mark all 4 holes. Help yourself with the included water level.**
+ **Lean the mounting plate against the wall and mark all 4 holes. Help yourself with the  water level.**
 {{wiki:20_rdc_charger:montaza_1.png}}\\