Differences

This shows you the differences between two versions of the page.

--- wiki:01_btms:00_hw:start [2024/03/18 12:09] – [Hardware] alen.mejak
+++ wiki:01_btms:00_hw:start [2024/03/19 07:47] – alen.mejak
@@ Line 8: / Line 8: @@
 ^ [[wiki:01_btms:00_hw:03_bm-hs]]   | BTMS Hall sensor                      | 1 × BM-HS for each string        | Choose the type based on the maximum string current                                                                                                                           |
 ^ [[wiki:01_btms:00_hw:04_bm-cs]]   | BTMS Cell sensor                      | 1 × BM-CS for each battery       | Choose 2, 6 or 12 V sensors depending on the battery voltage                                                                                                                  |
-^ [[wiki:01_btms:00_hw:05_bm-ps]]   | BTMS Power supply                     | 1 × PS-60-24 for each BM-GW         | One power supply can power several devices, if there are fewer of them than allowed according to the specification. Checks against the total consumption of powered devices.  |
+^ [[wiki:01_btms:00_hw:05_bm-ps]]   | BTMS Power supply                     | 1 × PS-60-24 for each BTMS       | One power supply can power several devices, if there are fewer of them than allowed according to thespecification. Checks against the total consumption of powered devices.  |
+^ [[wiki:01_btms:00_hw:05_ps-30-12]]   | BTMS Power supply                     | 1 × PS-30-12 for each BM-GW         |   |
 ^ Optional                          | **Depending on requirements**                                                                                                                                                                                                                          |||
 ^ [[wiki:01_btms:00_hw:06_bm-mc]]   | BTMS Master controller                | 1 × BM-MC for up to 32 strings   | Basically 1 per BM-GW