wiki:20_rdc_charger:50_troubleshooting:start
Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revisionLast revisionBoth sides next revision | ||
wiki:20_rdc_charger:50_troubleshooting:start [2023/05/03 12:11] – alen.mejak | wiki:20_rdc_charger:50_troubleshooting:start [2024/01/25 07:11] – alen.mejak | ||
---|---|---|---|
Line 1: | Line 1: | ||
===== Troubleshooting ===== | ===== Troubleshooting ===== | ||
- | | **ERROR** | ** POSSIBLE CAUSES | SOLUTION** | | + | <WRAP column 950px> |
- | | Output voltage | + | RDC Charger recovers error automatically. |
- | | Output current | + | To delete error by yourself long press button on charger housing or on application. |
- | | Input current | + | |
- | | Max Inrush Current (Cold Start) | < 30A @ 115Vac, < 60A @ 230Vac | | + | |
- | | Operating temperature | + | |
- | | Storage temperature | + | |
+ | |<100% 25% 35%>| | ||
+ | ^ Error ^Possible causes ^ Possible solution ^ | ||
+ | |CP positive voltage\\ CP negative voltage |Measured voltage on CP pin is out of range. | Check your charging cable and plug. Reconnect your EV. If error still appears, please contact your EVSE service. | ||
+ | |RCD sensor trip | DC current leak detected. | Please try to connect another EV, if error still appears, please contact your EVSE service. Otherwise, please contact an authorized car service department. | | ||
+ | |RCD sensor malfunction | ||
+ | |Undervoltage\\ Overvoltage | ||
+ | |Charge with ventilation | ||
+ | |PS reading error (EVSE) | ||
+ | |PS reading error (grid) | ||
+ | |Current is higher than allowed | ||
+ | |Internal temperature is too high | Temperature inside of charger is too high. | Make sure charger is not exposed to direct sunlight. Please contact your EVSE installer. | | ||
+ | |Can not lock | Only for charger with socket: Socket can not lock the connected plug. | Unplug the cable and check if the plug is clean. If it's clean, try charging with a different cable. If it still doesn' | ||
+ | |Can not unlock | ||
+ | |Socket temperature is too high | Only for charger with socket: The socket is overheating, | ||
+ | |Unavailable | ||
+ | |Other error | Other errors that cannot be resolved by the user. | Contact EVSE service. | | ||
+ | </ | ||
wiki/20_rdc_charger/50_troubleshooting/start.txt · Last modified: 2024/03/11 09:00 by saso.santelj